Need help?Do you have a question about the Deaf Bonce APOCALYPSE ATOM PLUS AAP-550.1D and is the answer not in the manual?
Guide to choosing appropriate power cable gauge based on length and current consumption.
Guide to choosing appropriate speaker cable gauge based on length and power consumption.
Details the connectors and controls for AAP-800.1D, AAP-1200.1D, AAP-1600.1D, AAP-2100.1D.
Details the connectors and controls for AAP-350.1D and AAP-550.1D.
Explains the functions and indicators of the remote control unit.
Explains serial and parallel connection impedance calculation for subwoofers.
Illustrates impedance calculations for various subwoofer coil configurations.
General| Model | APOCALYPSE ATOM PLUS AAP-550.1D |
|---|---|
| Category | Amplifier |
| Class | D |
| Number of channels | 1 |
| Power 1 Ohm (CEA-2006) | 550W |
| Power 2 Ohm (CEA-2006) | 300W |
| Subsonic Filter | 10Hz - 50Hz |
| Input Terminal | RCA |
| Signal-to-Noise Ratio | >90dB |
| Damping Factor | >200 |
| Peak Power | 1100W |
| Impedance | 1 Ohm |
| Input Sensitivity | 0.2V - 6V |
| Output Terminal | Screw terminals |
| Working Voltage | 9V - 15V |
| Bass Boost | 0dB - 12dB |
| Phase Shift | 0 - 180 degrees |
To Next Page