Deaf Bonce APOCALYPSE ATOM 5.5K PRO - User Manual

CLASS D
Atom 2.5K Pro Atom 3.5K Pro Atom 5.5K Pro
ATOM PRO
Atom 7.5K Pro Atom 9.5K Pro Atom 12.5K Pro

Summary

Safety Instructions

Vehicle Electrical System Checks

Check vehicle voltage, battery, and alternator for adequate power supply.

Installation Location and Environment

Cable Management and Protection

Power and Speaker Cable Selection

Wiring Diagrams

Mono Amplifier to Subwoofer Wiring

Connect amplifier power, ground, and speaker outputs to a subwoofer and battery.

Mono Amplifier to Head Unit Wiring

Connect amplifier RCA inputs to the head unit for signal input.

Amplifier Controls and Connectors

Controls for Models 5.5 K Pro and up

Details of input, output, crossover, gain, bass boost, and indicator LEDs.

Controls for Models 2.5 K;3.5 K Pro

Details of power, remote, ground, and input level adjustment controls.

Connection Methods

Single Subwoofer Wiring

Multiple Subwoofer Series Configurations

Multiple Subwoofer Parallel Configurations

Specifications

Possible Faults and Solutions

No Power or Protection Mode

Overload and No Sound Issues

Deaf Bonce APOCALYPSE ATOM 5.5K PRO Specifications

General

Model	APOCALYPSE ATOM 5.5K PRO
Class	D
Channels	1
1 Ohm RMS Power (14.4 V)	5500W
Damping Factor	>200
Signal-to-Noise Ratio	>90dB
Subsonic Filter	10Hz - 50Hz
Bass Boost	0 - 12dB
Fuse Rating	500A
Weight	5.5 kg
Input Sensitivity	0.2V - 6V
Crossover Frequency Low Pass	35Hz - 250Hz
Working Voltage	9V - 16V
Phase Shift	0 - 180 degrees