DeAgostini Model Space RB7 - Stage 2: Assembling the Rear Wings; Tools & Materials

Red Bull Racing RB7: Step by Step
™
7
CONTINUE PUTTING TOGETHER THE COMPONENTS OF THE FRONT WING, FOLLOWED
BY ASSEMBLING THE COMPONENTS FOR THE REAR WING OF YOUR RB7 MODEL.
ASSEMBLING THE
REAR WINGS
Phillips screwdriver (size 0)
Superglue
Tools & Materials
1
Rear upper wing
2
Rear wing adjuster
3
Rear middle wing top plate
4
Rear wing endplate (left)
5
Rear wing endplate (right)
6
Rear middle wing baseplate
7
Stickers
8
4 countersunk screws 1.4 x 6mm
7
3
4
6
8
1
2
5
Stage 2