Need help?Do you have a question about the Deagostini RB7 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Type | Ni-MH |
| Run Time | Approx. 20 minutes |
| Scale | 1:8 |
| Material | Die-cast metal and plastic |
Lists the parts of the GX21 silencer system, including manifold, tailpipe, and O-rings.
Explains how the expansion chamber in the silencer creates a resonance effect for engine performance.
Details the foam element's role in trapping dust and fine particles from the air intake.
Advises on saturating the filter with oil for better sealing and filtering.
Provides instructions and lists tools/materials for cleaning the air filter element.
Explains the switch's placement in the circuit to power the RC receiver and servos.
Lists the necessary tools and parts for assembling the silencer system.
Lists the tools and parts required to assemble and fit the air filter unit into the helmet.
Lists the necessary tools and the RC power switch for installation.
Lists the tools and parts for attaching the battery box and antenna tube.
To Next Page
