1 32
4
5
!
6 7
ADDING REFLECTIVE TAPE
Peel the protective plastic film off
one of the black eyes.
Pull one end of the backin paper o
a strip of reflective tape to expose
about 3cm of the adhesive.
Work slowly and carefully around the
eye until you reach your startin point.
Overlap the end by about 1mm and
smooth it firmly onto the surface.
Repeat Steps 1 to 5 for the second eye.
Very carefully, bein to wrap the
reflective tape around the eye, so
one ede fits just under the rim.
Keepin the tape taut to prevent any creases
formin, radually pull away the remainin
backin paper and smooth the adhesive side
down with your thumb.
Smooth the tape with
your thumb from front
to back to remove any
wrinkles or creases.
After tapin both eyes, they should look like this.
04
To Next Page
Loading...
