Deagostini Robi - Fitting White Borders to Robis Eyes; Robis Eye and Mouth Illumination

ADDING THE WHITE BORDERS
Assembled
eyes
Repeat Step 9 for
the second eye to
complete this stage.
98
BE CAREFUL!
FRONT BACK
Do not force the border on at an
anle. This is harder to do, and may
crease or tear the reflective tape.
Compare the white borders, as shown above, so you
can see which way round they fit. The front is raised
and the back has a recessed rim.
Slide a white border over one of the black eyes, with the raised
front of the border on the same side as the rounded front of
the eye. Be sure to keep the parts straiht.
Store the unused parts away safely in plastic bas until next time.
This will protect the polished surfaces and prevent them from
becomin scratched.
Later on in the assembly, you will be fittin Robi’s eyes with
LEDs, which will illuminate the white borders you have just
fitted. The LEDs come in a rane of colours includin orane,
reen, pink, purple and blue. The colour varies dependin on
Robi’s mood and the activity he is currently performin: for
example, when dancin, his eyes will continuously chane
colour (as well as flash on and o) to the music. Robi’s mouth
is also fitted with an LED that lihts up when he is talkin,
further addin to his expressive qualities.
A FACE THAT LIGHTS UP!
05
KEEP THE PARTS TIDY