05
coee switch,once there is water owering out you should close
the pump immediately.
6. When the lamp in power switch is flashing, the appliance is
preheating. When the lamp in power switch is illuminated, this
process is over, you press the coee switch, and then there will be
hot water owing out.
MAKE ESPRESSO
1. Remove the funnel by turning it in clockwise. Add ground coee
steel mesh with measuring spoon, a spoon ground coee power
can make about a cup of top-grade coee, then press the ground
coee powder tightly with the tamper
2. Set steel mesh into metal funnel, make sure the tube on the funnel
aligns with groove in the appliance, then insert the funnel into the
appliance from the “Insert” position, and you can fix them into
coee maker rmly through turn it anticlockwise until it is at the
“Lock” position..
3. Pour the hot water in the cup, aer the cup is warmed up, empty
the water in the cup and dry the cup, and then place the hot cup
on removable shelf.
4. At the time, the lamp in power switch shall be illuminated. If
it is flashing, please wait for a moment. Once the lamp in it
is illuminated, you should press the coffee switch, there will
be coffee flowing out. Press the coffee switch again when the
required amount is got, and then the pump stops working.
WARNING: Do not leave the coffee maker unattended during
making the coee, as you need operate manually sometimes!
1. Aer nishing making the coee, you can take the metal funnel
out through turn clockwise, then pour the coee residue out with
the steel mesh pressed by press bar.
2. Let them cool down completely, then rinse under running water.
3. The working time for brewing coee is 180 seconds at most, then
sort out the power outage and press the power button again to
start the machine.
MAKE HOTWATER
When the preheating is finished, the power indicator lights up
solidly. Then press the coee switch, and the water pump starts
to pump water. Turn the knob to “Hot water”, and then hot water
will ow out of the steam pipe. To stop making hot water, press
the coffee switch again. Hot water is used for warming cup,
making tea or cooling down the appliance.
The working time for hot water is 180 seconds at most, then sort
out the power outage and press the power button again to start
the machine.
Please refer to the operation described in the section of “Make
ESPRESSO” when need to adjust the working time for making hot water.