GETTING TO KNOW YOUR BARISTA KETTLE
Water Test
BEFORE FIRST USE
1. Remove and safely discard any packaging material or promotional labels attached to your kettle.
2. It is recommended that filling the kettle to the maximum level with cold tap water before your first using, bring to the
boil by selecting the BOIL 212 °F, then discard the water.
3. Your kettle will only operate when positioned on the power base.
BEFORE FIRST USE
Perform the Water Test before using your kettle to make sure it’s working properly. Do not drink the water that is boiled
during this initial test.
！
CAUTION!
3
To Next Page
Loading...