10. The approximate amount of ice will be displayed on the control panel. The ice maker automatically
stops making ice when the ice cube tray is full inside - the “ice full” indicator will turn on (as
shown in the figure above).
11. You can enjoy your ice cubes when the control panel shows “Ice available”, “Half full”, “Almost full”
or “Ice full”. Pull and hold the lever on the control panel and nugget ice will drop from the ice outlet.
TIPS：1. Please take out all the ice cubes inside the unit before you shutdown t prevent water that
may overflow due to the ice melting.
2. Excess water in the internal water tank will overflow to the drip tray. If there is too
much water in the drip tray, unplug the water drain cap 2 to drain the water inside the unit.
To Next Page
Loading...
