User Manual Floormate – V. 2.7 B/C
- 8 -
2.8 User
Carefully read through this user manual before operating the
DecoRad® Floormate.
Before switching on the DecoRad® Floormate, please ensure that
the personal UV safety package as described in the user manual is
used. The UV-resistant facial shield and skin covering clothes
(including gloves) are obligatory.
The lamp emits large amounts of heat; keep out of reach of
explosive or highly flammable mixtures.
Make sure that the room where the DecoRad® Floormate will be used
is properly lit and ventilated.
The Floormate should be lifted by 2 persons.
Fold down handle bar and secure to lift.
Never lift from the lamp unit.
Dirt on the lamp and/or reflectors (e.g. from coatings or fingers)
can shorten the life span of the lamp or reduce the UV energy output
If needed, clean the cooled down lamp and reflector with IPA
alcohol and paper tissue.
Make sure the Floormate is visually checked (e.g. wheels, lamp,
reflector etc.) - Topple the DecoRad® Floormate over backwards and
let it rest on the folded out handle bar.
Please make sure that bystanders without appropriate UV protection
are at a safe distance of 10 meters / 33 ft.
In order to prevent damage to the DecoRad® Floormate and the user,
the user is strictly prohibited to work with tools on the DecoRad®
Floormate in any other way than indicated in this user manual for the
purpose of maintenance.
To Next Page
Loading...