11
3 / DESCRIPTION OF YOUR APPLIANCE
EN
fig.5
fig.6
fig.7
•Turnspit (fig.5)
Pass the spit through the joint to be roasted,
thread on the second fork, centre the joint
and screw the forks tight.
Place the spit in its cradle: the cradle should
be placed in the deep enamel dish.
Slide the cradle on to shelf support 3, push
gently to engage the end of the spit into the
square drive at the back of the oven (Fig. 6).
Unscrew and remove the handle, so that the
door can close. At the end of cooking, screw
the handle back on to the spit, so that you can
remove the joint without burning yourself.
NN..BB
.: should you wish to roast a large piece of
meat, you can place the dish on the bottom of
the oven and insert the cradle in shelf support
3, to prevent the meat from touching the back
of the dish and stopping the spit from turning.
ACCESSORIES (DEPENDING ON MODEL)
••
Front
Rear
To Next Page
Loading...
Need help?
General
