fig. 7
- If necessary, remove all the door's inner glass
panels (fig.4).
This unit is made up of one or two glass panels
depending on the model, with a black rubber buffer
in each corner
(fig. 5).
- After cleaning, replace the four rubber corners,
taking care to follow the markings on the glass:
ttoopp lleefftt:: LL
ttoopp rriigghhtt:: RR
Place the interior glass unit in the door, so that L and
R are on the hinge side
(fig.6).
- If your oven has just one interior glass, this will be
found next to
the clip-on glass.
- Clip in the final glass by placing the
”P.Y.R.O.L.Y.T.I.C” marking towards you (fig.7).
- Remove the red plastic stops (fig. 8).
Your appliance is now ready for use again.
To Next Page
Loading...
Need help?
General
