32
Turning on a cooking zone
Power adjustment
Using your hob in all simplicity
maximum setting BOILING
FULL POWER
Involves auto-power limitation (8) for the other
ring located on the same side
- Press on the ON/OFF button located on the hob.
All of the other functions are on the remote control.
Only the locking function for the heated zones is located on the hob (please see the
keypad locking chapter).
0
- Press on the selector button on your remote
control corresponding to the desired cooking zone.
If the indicator lights up followed by an
audible signal: check that your hob is properly
turned on.
5
The control unit displays 0 and a fixed red
indicator lights up on the hob.
- On your remote control, press on the + button
or on the preset power setting desired.
low setting 7 = SIMMERING
medium high setting 11 = COOKING
high setting 15 =
INTENSE COOKING
Before any modification to (or stoppage of) one or several settings for a cooking zone: select this zone
by pressing .
To turn off the zone: Carry out a long press on the button for the zone.
Caution: the stoppage of a zone leads to the selection
[ ]
of another cooking zone.
Each cooking zone is fully independent and features a dedicated keypad.
Unless you request a power setting, the cooking zone will automatically turn off after a few seconds.
To Next Page
Loading...
Need help?
General
