dedolight Turbo DLED2 - General Description of the System; Technical Data

DLED Turbo System
Manual v1.8
4
GENERAL DESCRIPTION OF THE SYSTEM
The compact DT3, DT7 and DT10 power supply is intended
exclusively for use with the applicable dedolight DLED Turbo light
head.
The smallest version, same size as the well-known DLED2, which
features 20W, or as bicolor 2x20W, now working with a highly
effective 40 W or double 40 W system for bicolor. Active cooling in
a silent version, enabling drastically enhanced output. Complete,
versatile lighting kit in a handbag format, with the full range of light-
shaping and imaging capabilities.
Soft boxes, optionally available, for gentle, pleasing soft light
application.
Most probably the smallest, most versatile lighting kit. Small
enough to be allowed as cabin baggage.
Also in the Turborange: DLED7 and DLED10
TECHNICAL DATA
Focus Range
(Intensity Range)
50° - 5° (1:7)
Focus Control
3/4 turn on focus ring
Power Max. Power
Consumption
40W (DLED3) / even for bi-color version,
alternating between two 40W light sources.
90W (DLED7) and 308W (DLED10)
Mounting
5/8" (16 mm) receptacle AND and 1 1/8”
(28mm) stud.
Operating Position
Any
Tilt Control
Adjustable friction
Accessory Holder
Ø 2.3" (58 mm) for mounting the unique
range of DLED3 front - end accessories
Ø 3“ (76 mm) diameter (DLED7),
Ø 5“ (128 mm) diameter (DLED10).,
Safety
Protection Class III, SELV, IP20
Cooling
Active Silent Cooling
UV
No UV radiation
DC in connector
5.5/2.5mm Pole (for applicable DTs)