Need help?Do you have a question about the Deep Sea Electronics Plc 550 and is the answer not in the manual?
General| Brand | Deep Sea Electronics Plc |
|---|---|
| Model | 550 |
| Category | Controller |
| Language | English |
Explains symbols, warnings, and conventions used throughout the document.
Lists recognized trademarks and acknowledgements relevant to the manual.
Details the P810 interface used for RS232 communication with controllers.
Defines the technical specifications of the RS232 serial interface.
Defines the technical specifications of the RS485 serial interface.
Explains communication protocols and the use of Modbus.
Discusses network topology limitations concerning multiple master devices.
Details the Modbus Function 3 for reading multiple register values.
Details the Modbus Function 16 for writing multiple register values.
Explains how the system handles and reports communication errors.
Provides details and guidelines for using password functionality for access control.
Details the different operational modes of the control unit.
Explains the status of internal state machines within the module.
Lists and defines codes for various alarm conditions and their meanings.
Identifies control buttons and their corresponding functions and numbers.
Defines codes used to represent the states of digital inputs.
Defines codes used to represent the states of digital outputs.
Lists and defines the meaning of LED status indicators on the control unit.
Lists codes for performing system control functions via telemetry.
To Next Page
