To Next PageTo Next Page
Need help?Do you have a question about the Deepace KC901V and is the answer not in the manual?
General| Impedance | 50Ω |
|---|---|
| Display | TFT LCD |
| Display Size | 4.3 inches |
| Display Type | TFT LCD |
| Return Loss Range | 0 dB - 60 dB |
| Battery Life | 4 hours |
Lists key characteristics of the KC901V instrument, including frequency range and capabilities.
Outlines the primary operational capabilities of the instrument, such as transmission and reflection measurements.
Details various practical scenarios and industries where the KC901V instrument is effectively used.
Steps for verifying the product upon receipt and checking the package contents for completeness.
Indicates potential for inaccurate testing results or minor risks associated with operation.
Indicates potential for personal injury, equipment failure, or other hazards.
Specific safety precautions for instrument operation, handling, and charging.
Guidelines for selecting appropriate battery types and specifications for the KC901V.
Step-by-step instructions for physically installing batteries into the instrument.
Instructions for attaching and properly using the shoulder strap for carrying the instrument.
Guidance on proper methods for carrying and holding the instrument during use.
Details the instrument's keyboard layout and the function of the power button.
Identification and explanation of the instrument's signal input/output ports.
Description of additional ports like TF card slot, RJ45 Ethernet, power input, and USB port.
Lists and briefly explains the instrument's main operational functions.
Explains the function and usage of the MODE button for menu navigation.
Details the process and application of reflection measurements (S11).
Explains transmission measurements (S21/12) and their typical applications.
Describes the insertion loss measurement function and its usage.
Details the spectrum analysis mode and its applications.
How to adjust the instrument's sweep and operation modes.
Explains the local oscillation mode for signal imaging and interference judgment.
How to set fundamental testing parameters like central frequency and span.
Configuration options for the field strength measurement mode.
Detailed steps for performing an insertion loss test.
Procedures for saving measurement data and settings to storage.
Notes and recommendations for system settings to ensure accuracy.
Explains the necessity and context of user calibration for accurate measurements.
Describes the different calibration modes: factory, system, and user.
General procedure for initiating and performing calibration.
Steps for calibrating before performing S21 (transmission) measurements.
Steps for calibrating before performing S11 (reflection) measurements.
Details the SOL (Short, Open, Load) standards used for S11 calibration.
How to compensate for the influence of cables during measurements.
Instructions for using an external bridge with the instrument.
Pre-measurement checks and preparations for field use.
Guide to quickly adjust a duplexer's performance using the instrument.
Comprehensive guide to various antenna testing techniques, including SWR, impedance, and gain.
Procedure for measuring the electric length of transmission lines using phase characteristics.
How to use the instrument for basic spectrum analysis.
Method for locating interference sources using signal strength direction finding.
Instructions for cleaning the instrument's exterior components.
Additional important points for instrument care, handling, and storage.
Explains the underlying measurement principles and circuit design of the KC901V.
Details on battery charging times and operational endurance for different functions.
Lists the detailed technical specifications and performance parameters of the instrument.
