13
When USB Drive is enabled , the PosiTest AT-A uses a USB
mass storage device class which provides users with a simple
interface to retrieve stored data in a manner similar to USB flash
drives and digital cameras. USB Drive is also required to import
stored measurements into PosiSoft Desktop software (pg. 12).
USB
When enabled and connected to a computer, the PosiTest AT-A
will be recognized as a Keyboard. Readings are sent to the
computer as they are taken, emulating keystrokes, followed by a
carriage return.
Keyboard
Stream
NOTE:
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Keyboard and Streaming
visit: www.defelsko.com/usb/stream
The above WiFi and USB menus contain a Sync .net Now
option. When selected, the instrument immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select Auto
Sync .net from within the USB connect menu to automatically
synchronize upon connection to a PC. Additional measurements
added to memory while connected are synchronized only when
the USB cable is disconnected and reconnected, or when the
Sync.net Now option is selected. WiFi connected gages
automatically attempt synchronization upon power-up.
Sync .net Now
PosiSoft Desktop is required when using USB to
synchronize measurements with PosiSoft.net.
NOTE:
Allows communication with a smart device running the
PosiTector App (pg. 12) via auto-pairing Bluetooth Smart
(BLE) wireless technology.
Bluetooth Smart
To Next Page
Loading...
