Technical Data
Conforms to: ASTM D4541, ASTM D7234, ISO 4624 and others.
Specifications:
*requires the use of a 50 mm stand off
Resolution: 1 psi (0.01 MPa) Accuracy: ±1% Full Scale
The instrument also measures in N/mm
2
and Newtons (unit of
force). See Units (pg. 11).
Dolly Size (mm)
Max Pull-Off
Pressure (AT-A)
10 mm
14,000 psi (96 MPa)
14 mm 7,000 psi (50 MPa)
20 mm 3,500 psi (24 MPa)
50 mm*
560 psi (3.8 MPa)
16
Verification
The PosiTest AT Verifier is available for verifying the accuracy
and operation of PosiTest Adhesion Testers and is an important
component in fulfilling both ISO and in-house quality control
requirements. Fully portable with hardshell carry case for use in
the field or laboratory. Learn more at: www.defelsko.com/at/verifier
To Next Page
Loading...
