PAGE 7 OF 24
Autobake (Switching the oven on and off automatically) continued.
The automatic control will automatically switch the oven on and the symbol will light
up in the clock display.
Cooking will commence at the selected temperature and for the selected cooking period.
The oven will automatically switch off at the selected stop time and emit an electronic tone
for about one minute
The volume of tone may be adjusted while it is on, by pressing button 5.
To cancel the tone, press any of the buttons except 5 and 6.
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• Return the multifunction selector to the OFF position.
• The oven thermostat must be turned to the OFF position in an anticlockwise direction.
Example:
Suppose the time of day is now 13h00. The food needs cooking for 2 hours at 180°C and it
should be ready to serve at 18h00. Here’s what to do.
• Ensure the clock is set to the correct time of day, 13.00.
• Press buttons 2 and 6 until 02.00 is displayed.
• Press buttons 3 and 6 until 18.00 is displayed.
• Set the oven thermostat to 180°C and the multifunction selector to
Do not use the Autobake function for cooking periods that are less than 60 minutes.
or
.
• Set the multifunction selector and oven thermostat to
the required settings.
• Press and hold button 2. The clock will display 00.00.
• Press button 6 to select the cooking time
• Release the buttons and the clock will again display the
time of day .
• The word AUTO and the cook symbol will light up in the display.
• After the oven will switch off automatically and emit an electronic tone for about one
minute. ( 4 beeps every 3 seconds )
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• Return the multi function selector to OFF
• The oven thermostat must be turned to the OFF position in an anticlockwise direction.
Switching the oven off automatically
+
-
To Next Page
Loading...
Need help?
General
