THANK YOU FOR CHOOSING DEFY
You are now the proud owner of one of the finest and most modern tumble dryers that
today’s technology can produce. You and your Autodry are going to make a great team
together. But first it will pay if you really get to know each other. This book will tell you
all you need to know about your machine, what it will do and how to do it. Please read all
the instructions carefully before operating the machine.
INSTALLATION
Floor Standing
• Remove all packaging.
• The tumble dryer should be placed in a well ventilated area. If the Dryer is operated in a
confined space, moisture extracted from the clothing during the drying process will
condense on the walls.
• The rear of the Dryer must be free of any restrictions, especially round the fresh air grille.
Do not position the Dryer near any long curtains or drapes as these could be drawn against
the air intake grille. This would result in a much longer drying time
• Allow a 100 mm. Air-gap at the rear of the Dryer for ventilation purposes.
Wall Mounted
A wall mounting kit, Part number 060680, enabling the machine to be suspended on the
wall above a washing machine, is available from the nearest Defy Service Centre.
The appliance must be earthed and the manufacturer and seller do not
accept responsibility for any damage due to incorrect electrical connection.
Electrical
• The dryer is designed to operate on a 230 volt, 50 Hz, 15 Amp, AC power supply.
• The power cord has a 15 Amp moulded plug attached.
• This plug should be pushed into a 15 Amp earthed wall.
• If the power-cord should ever need replacing, use only a genuine cord available from
the nearest Defy Service Centre.
To Next Page
Loading...
Need help?
General
