THE CONTROL PANEL
1. Drying guide
2. Hot / Warm selection button
3. Power ON / OFF button
4. Timer knob
5. Indicator light
1 2 3 4 5
1 Drying guide
• The guide is indicative of the types of fabric that should be dried on the HOT
(normal) or Warm (delicate) drying cycles.
2 Hot / Warm selection button
• This button knob allows the selection of High (HOT) or Low (WARM) drying cycles.
• We recommend that a hot cycle be used for normal wash loads and a warm cycle for
delicate articles.
• If the button is not pressed the machine will operate on a HOT cycle.
• If the button is pressed in, the machine will operate on a warm cycle.
• There is an automatic 10 minute cooling down period at the end of each drying cycle.
3 Power On / Off button
• Pushing the button will start the machine but only if a time cycle has been selected.
• Pushing the button again will switch the machine off.
4 Timer knob
• Turn the knob in a clockwise direction only to select the required drying period.
• If the required setting is accidentally bypassed, do not turn the knob back but continue
turning clockwise to the desired setting.
5 Indicator light
This light indicates that the machine is switched on.
The Door
• To open the door, pull on the handle.
• Opening the door, during the drying cycle, will stop the machine.
• Closing the door will allow the machine to complete the drying cycle.
To Next Page
Loading...
Need help?
General
