Defy DDW 366 - Scheduling Wash Time (Time Delay)

/
35 / 48
EN
Operating the product
Changing Warning Sound Volume
1. After switching on your machine, press
the Menu key for 3 seconds.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
2. Press <- and +> keys to move to the
“S:” position on the display.
3. Each pressing on the Selection key will
change the warning sound volume as
"S:0" off, "S:1" medium and "S:2" high.
4 Switch off the machine with the On/
Off key to save the changes.
SelfDry
(Depends on the Model)
Thanks to the “SelfDry” feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely “OFF” and
“ON”.
You may use sub-menu settings to change
“SelfDry” settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
C
Auto door opening feature
opens the doors at the end of
the washing cycle thanks to
the “door opening shafts”. This
process takes about 2 minutes.
Do not force to close the door if
the power is interrupted while
the shafts are moving out.
Operation shall be completed
and shafts shall be retracted
when the power is restored.
C
SelfDry function may cause
changes to the cycle time.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine, press
the Settings Menu key for 3 seconds.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
2. Press <- and +> keys to move to the
“L:” position on the display. Select the
position you want with the Selection
key. Interior lighting is off in “L:0”
position and on in “L:1” position.
3. Switch off the machine with the On/
Off key to save the changes.
Schedulng the washng
tme
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 24 hours.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
3. Set the desired time by pressing the
Time Delay key. Time will increase with
increments of 30 minutes up to 6 hours
and after that in 1 hour increments up
to 24 hours every time you press the
key.