EasyManua.ls Logo

Defy DDW178 - Page 46

Defy DDW178
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
EN
A smear remans on glasses that resembles mlk stan whch can not
be removed when wped by hand. A blush / ranbow appearance
occurs when the glass s ponted to lght.
Excessve rnse ad s used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
Corroson has occurred on glass due to soft water. >>> Measure the hard-
ness of the supply water appropriately and check the water hardness
setting. If your supply water is soft (<5 dH), do not use salt. Choose prog-
rammes that wash in higher temperatures (e.g. 60-65°C). You can also use
glass protective detergents that are commercially available.
Foam forms n the machne.
Dshes are washed wth hand-wash detergent by hand but not rnsed be-
fore placng them nto the machne. >>> Hand-wash detergents do not
contain antifoam. There is no need to hand-wash the dishes before pla-
cing them into the machine. Removing the coarse soil on the dishes under
tap water, with a tissue paper or fork will be sufficient.
Rnse ad has splled nto the machne when addng rnse ad. >>> Take
care that rinse aid is not spilled in the machine when you are filling it.
Clean any spilled rinse ait with the help of a tissue paper/towel.
Ld of the rnse ad reservor s left open. >>> Make sure that the lid of the
rinse aid reservoir is closed after adding rinse aid.
Ktchen utensls are broken.
Dshes are not placed orderly n the machne. >>> Load the dishes as desc-
ribed in the user manual.
Baskets are overloaded. >>> Do not overload the baskets in excess of
their capacity.
Water remans n the dshwasher at the end of the programme.
Flters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
Dscharge hose s clogged/blocked. >>> Check the discharge hose. If ne-
cessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
C If you cannot elmnate the problem although you follow the nstructons n
ths secton, consult your dealer or the Authorsed Servce Agent. Never try
to repar a nonfunctonal product yourself.

Table of Contents

Related product manuals