PAGE 11 OF 16
OPERATION
EVERYTIME A TOUCH PAD IS PRESSED THE OVEN WILL BEEP.
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
x Press the CLOCK pad.
x Press the NUMBER pads to enter the correct time.
x Press the CLOCK pad again.
NOTE: This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption,
the display will show ENTER CLOCK TIME.
If you prefer not to have the clock displayed, touch RESET
The clock time can be checked during cooking by pressing the CLOCK pad
Clock energy saving: The clock will switch off after a period of between 1-5 minutes in order to conserve energy.
SETTING THE OVEN TIMER
x Press the TIMER pad
x Enter the required time by pressing the relevant NUMBER pads ( Max = 99min and 99 sec)
x Press the START / STOP pad
NOTE: Time countdown is displayed for 5 seconds before the display reverts to the time of day.
To cancel the timer during the cooking process, Press the TIMER pad and then the RESET pad.
.
SETTING A COOKING PROGRAMME
A. One-stage cooking
1. Press the NUMBER pads to set a cooking time. You can set a
cooking time from one second to 99 minutes and 99 seconds.
2. If you want to set a power level other than 100% power, press the
POWER pad. Then press the NUMBER pads to enter the power
level.
3. Press the START/STOP pad to start cooking. Use single digits to set a
cooking power level:
B. Two-stage cooking
1. Some recipes require two stages of cooking at different temperatures.
2. SET STAGE 1: Follow steps 1 and 2 in “One-stage Cooking”. DO NOT PRESS THE START/STOP PAD
3. SET STAGE 2: Press the COOK pad, then enter the desired cooking time and (lower) the power level. (Most 2
-stage recipes use lower power for the second stage.)
4. Press the START/STOP. Pad.
NOTE:
During cooking you can press the POWER pad to check the power level.
Number pad Cooking power
1, 0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
To Next Page
Loading...
Need help?
General
