• After 40 minutes the oven will switch off automatically and emit an electronic tone
for about one minute. (4 beeps every 3 seconds)
• To cancel the tone, press any of the buttons.
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• The oven thermostat must be turned to the OFF position in an anticlockwise
direction.
Switching the oven on and off automatically ( Autobake )
Autobake is intended for dishes such as roasts and casseroles. These are not affected by a
waiting period in a cold oven.
• Prepare your meal and place it in the oven.
• Set the cooking period required by pressing buttons 2 and 6 until the desired period is
displayed.
• Set the stop time by pushing buttons 3 and 6 until the desired stop time is displayed.
• Release the buttons and the clock will again display the time of day.
• The word AUTO will light up on the clock display.
• Now set the relevant oven thermostat to the desired temperature setting
The automatic control will automatically switch the oven on and the symbol will
light up in the clock display.
Cooking will commence at the selected temperature and for the selected cooking period.
The oven will automatically switch off at the selected stop time and emit an electronic
tone for about one minute (4 beeps every 2 seconds). To cancel the tone, press any of the
buttons.
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• The oven thermostat must be turned to the OFF position in an anticlockwise
direction.
Example:
Suppose the time of day is now 13h00. The food needs to be cooked for 2 hours at 180 C
and it should be ready to serve at 18h00. Here’s what to do.
• Ensure the clock is set to the correct time of day, 13.00.
• Press buttons 2 and 6 until 02.00 is displayed
• Press buttons 3 and 6 until 18.00 is displayed.
• Set the oven thermostat to 180°C.
Hint:
It is not advisable to use the Autobake function for cooking periods that are less
than 60 minutes.
Important:
If the Automatic start and or stop functions are not required, the clock must
be set to manual mode.
Press button 4
Unless this is done, the oven will not work.