Need help?Do you have a question about the Degelman R570P and is the answer not in the manual?
General| Model | R570P |
|---|---|
| Category | Farm Equipment |
| Type | Rock Picker |
| Hitch Category | Category II |
| Required Power | 60-100 HP |
Defines directional terms (front, rear, left, right) as used throughout the manual.
Explains the meaning and importance of the safety alert symbol.
Details the meaning and usage of DANGER, WARNING, and CAUTION signal words.
Provides essential safety guidelines and precautions for operating and maintaining the equipment.
Emphasizes operator responsibility for safe and efficient machine operation.
Explains the basic function and operation of the Degelman Prong Type Rock Picker.
Step-by-step instructions for assembling the rock picker components upon receipt.
Guidelines for selecting and preparing a tractor suitable for operating the rock picker.
Procedures for connecting and bleeding the hydraulic system of the rock picker.
Instructions for safely attaching and detaching the rock picker to a tractor.
Steps to ensure the hitch pole is parallel to the ground for optimal operation.
Procedure for correctly removing transport pins before operating the machine.
A comprehensive checklist to ensure the machine is ready and safe for operation.
Critical steps and procedures for the initial break-in period to ensure unit integrity.
Outlines the operator's duties for safe and proper use of the rock picker.
Key safety precautions to observe immediately before and during machine operation.
Instructions for adjusting the grill tines to skim the ground without digging.
Practical advice and operational hints for performing rock picking in the field.
Procedures and safety considerations for loading and unloading rocks from the hopper box.
Essential safety rules and guidelines for transporting the rock picker on roads and highways.
Step-by-step instructions for converting the machine into transport configuration.
Safety precautions to follow when storing the rock picker for extended periods.
Recommended procedures for preparing and storing the machine after the season.
Information on the location, importance, and maintenance of safety decals on the machine.
Part numbers and descriptions for ordering replacement safety decals and reflectors.
Critical safety practices to adhere to when performing maintenance or repairs on the machine.
Specific safety guidelines for working with the high-pressure hydraulic system.
Precautions and recommendations regarding safe tire mounting and maintenance.
Tables providing correct torque values for various bolts and capscrews.
Details on standard hardware and hydraulic hose specifications used on the machine.
Recommended torque values for tightening hydraulic fittings.
Specifies torque values for wheel nuts and bolts, and tightening patterns.
Recommended service and lubrication intervals based on operating hours.
Instructions and best practices for greasing the machine's various components.
Guidance on selecting and using appropriate hydraulic fluids and greases.
General preparation and procedures for repairing hydraulic cylinders.
Detailed steps for disassembling and reassembling a threaded head cylinder with a set screw.
Detailed steps for disassembling and reassembling a threaded head cylinder with a locking ring.
Procedures for disassembling, inspecting, and assembling wheel hubs.
Diagram and identification of common parts found in spindle and hub assemblies.
Step-by-step guide for removing and installing grill tines.
How to adjust the locking collars on the grill shaft for proper movement.
Instructions for fine-tuning the grill depth control stop for optimal picking.
Explains how different settings of the cylinder rod end affect lifting speed and capacity.
A guide to common problems, their causes, and recommended solutions for the rock picker.
Details the limited warranty coverage for new Degelman agricultural equipment.
Outlines the customer's responsibilities for operating, maintaining, and servicing the equipment.
Information on how to register the product and provide necessary details for service.
Identification and part numbers for various hitch components.
Parts list and diagrams for the hopper box and grill assembly.
Parts breakdown for the main frame and associated components.
Parts and specifications for the wheel assemblies.
Identification of parts related to the hub and spindle assemblies.
Parts information for older or previous hub/spindle component models.
Part numbers and diagrams for hydraulic hoses, fittings, and cylinders.
Specific parts and diagrams for the lift/dump hydraulic cylinder.
To Next Page
