Degelman PRO-TILL Series User Manual

QUICK-START GUIDE
*
C
Set Cutting Depth
A
Connect Hydraulics
ROLLERS
WINGS
WHEELS
TRANSPORT
JACK
5
4
1
3
2
5
4
1
3
2
FLO AT
FLO AT
(if available)
(Tractor controls and arrangement will vary )
FLOAT Transport
Cylinders
FLOAT Wing
Cylinders
* Quick-Start Guide is for reference purposes only. Refer to operators manual for complete safety and operation information before operating.
B
Put in Field Position
1”
1”

Degelman PRO-TILL Series Specifications

General

Brand	Degelman
Model	PRO-TILL Series
Category	Farm Equipment
Language	English

Summary

Connect Hydraulics

FLOAT Transport Cylinders

Identify and connect FLOAT Transport Cylinders for hydraulic operation.

FLOAT Wing Cylinders

Identify and connect FLOAT Wing Cylinders for hydraulic operation.

Jack and Transport Components

Locate and connect the Jack and TRANSPORT components.

Rollers and Wheels

Identify the machine's ROLLERS and WHEELS.

Put in Field Position

Field Position Adjustment

Adjust the implement to the correct field position.

Set Cutting Depth

Cutting Depth Adjustment

Adjust cutting depth using hydraulic cylinders for optimal soil engagement.

FLOAT Cylinder Operation

Engaging FLOAT Mode

Place Wing and Transport Cylinders into FLOAT mode.

Field Testing and Adjustment

Operational Check and Adjustment

Test, check, and adjust the machine's operation.

Headland Turn Maneuver

Lower Wheels for Turns

Lower the machine's wheels for headland turns.

Transport Information

Transport Position and Roller Check

Ensure rollers are properly positioned for transport.

Transport Dimensions and Speed Limits

Adhere to transport dimensions and maximum speed limits.