Degritter Automatic Record CleaningMachine - Cooling water function; Dry program; Degas program

3) RUNNING PROGRAMS
10) DEGAS
The degas program gets rid of excessive gas in your distilled water.
This improves the ultrasonic cleaning process.
16 Using the machine
17 Using the machine
PROGRAM NAME WASHING DURATION
Quick
Medium
Heavy
2 minutes 15 seconds
3 minutes 45 seconds
6 minutes 45 seconds
Medium
Heavy
Quick
4:00
PROGRAM
DRYING TIME
Select the desired program by rotating the button on the right. To
start the selected program, press the button on the right. You can
stop the program by pressing the button on the left or pause the
program by pressing the button on the right. You will be notified
with three audible beeps when the program has finished.
4) WASHING PROGRAMS
Degritter has three washing programs with fixed pre-defined washing
cycle lengths. The program washing durations above do not include
drying time that can be configured as needed.
5) QUICK
Quick program is suitable for mostly clean records that need rinsing or have
light dust on them.
6) MEDIUM
Medium program runs a thorough cleaning cycle that will clean most of
the records. This program is normally recommended.
7) HEAVY
Use the heavy program when the quick or medium programs have not
been sufficient to clean the record. Heavy program features an extra long
cleaning period.
Washing programs move the record back and forth.
This is normal and helps with the cleaning process.
9) DRY
The Dry program allows you to run the drying mode separately, without
a washing cycle. Increase or decrease the drying time by rotating the
button on the left.
You can also adjust drying time during a program when the record is
being dried.
8) COOLING WATER
Energy emitted during ultrasonic cleaning will slowly increase the
cleaning water temperature. Excess heat is mitigated automatically to
protect records by adding 3 minutes of cooling to the washing time when
over-temperature is sensed (35 °C or 95 °F). The ultrasonic generator
stops working for this time and air is forced through the machine.
2:29
PROGRAM REMAINING TIME
PROGRESS BAR
WATER COOLING INDICATOR
CURRENT OPERATION
PROGRAM
DRYING TIME
It is recommended to run Degas program with every new tank of
distilled water before adding cleaning fluid.
Water cooling cycles can lengthen the washing program, but they will
not increase the total ultrasonic cleaning time that the record is
exposed to.