30 Frequently asked
questions
31 Frequently asked
questions
HOW MANY RECORDS CAN I WASH WITH
A SINGLE TANK OF WATER?
You need to change the water at least once per week.
Otherwise the tank will develop microbial growth. More
frequent water changes will depend on how many records
you clean and how dirty they are. A simple water change
indication is water clarity: if the water is unclear, you’ll want
to change the water.
MY WALL OUTPUT VOLTAGE IS NOT AC 230 V NOR AC 115 V, WILL
DEGRITTER WORK?
Yes, Degritter will work with AC voltages from 100 V to 240 V. You have to make sure that the AC selection
switch is in the same value range, eg. 230 V switch position for 210-240 V wall outputs and 115 V switch
position for 100-130 V.
IS THE MACHINE SAFE FOR CLEANING A
SHELLAC RECORD?
We have not conclusively tested cleaning shellac records with
Degritter. If you decide to clean a shellac, then do so on your
own responsibility.
HOW OFTEN DO I HAVE TO CLEAN THE
FILTER?
We recommend cleaning or replacing the filter
after every 50 to 100 cleaning cycles
F.A.Q.
Frequently
Asked
Questions
We have not conclusively tested cleaning lacquer-acetate records with Degritter. If you do clean a
lacquer-acetate record, then do so on your own responsibility.
IS THE MACHINE SAFE FOR LACQUER-ACETATE RECORDS?
Yes, you can use your own cleaning fluid. Avoid pH extreme solutions, such as very high acidity or very
alkaline chemicals. Also avoid strong organic solvents, as these will likely damage the vinyl.
CAN I USE MY OWN CLEANING FLUID?
To Next Page
Loading...