5
©
1999 Directed Electronics, Inc.
Transmitter Functions
The receiver uses a computer-based learn routine to learn the
transmitter buttons. This makes it possible to assign any specific
transmitter button, or combination of buttons, to any receiver
function. The transmitter initially comes programmed with the
Standard Configuration, but may also be customized by an autho-
rized dealer. The buttons used in all of the instructions in this
manual correspond to a Standard Configuration transmitter.
Button
The locking/arming, unlocking/disarming, and panic functions are
controlled by .
Button
Timer Mode and an optional auxiliary function that you have
added to your system are controlled by . Timer Mode works by
pressing for less than one second. An optional auxiliary func-
tion, such as trunk release, can be controlled by pressing for
1.5 seconds.)
The auxiliary output controls _____________________________.
and Buttons
The remote start function of your system is controlled by pressing
and simultaneously.
Standard Configuration
To Next Page
Loading...