8
©
1999 Directed Electronics, Inc.
Use the Silent Mode
™
to temporarily turn off the lock/arm or
unlock/disarm confirmation honks by briefly pressing before
either locking/arming or unlocking/disarming the system. The
confirmation honk(s) will then be eliminated for that one opera-
tion only. To permanently turn off the lock/arm and unlock/disarm
confirmation honks, contact your installation dealer.
You can prevent your system from automatically activating and
locking the doors, by using Valet
®
Mode. This is very useful when
washing the vehicle or having it serviced. In Valet
®
Mode, the sys-
tem will not activate the optional Starter Kill, even with the trans-
mitter, but all convenience functions (door locks, trunk release,
etc.) will work normally.
To enter or exit Valet
®
Mode using your transmitter:
1. Open any door.
2. Press .
3. Press .
4. Press again.
The Status LED will light solid if you are entering Valet Mode, and
it will go out if you are exiting Valet Mode.
Valet Mode
Silent Mode
To Next Page
Loading...