SIM-Q MKII Installation/operation instructions
DEIF A/S Page 16 of 18
Graph above: There are no restrictions when you select set point (Ran) in 500 µF settings.
Graph above: Beware of response time when you select set point (Ran) in 2000 µF settings.
If the installation contains frequency converters that work below 20 Hz, the SIM-Q MKII with option
LF should be used instead, as it provides reliable measurements down to 5 Hz.
4.3 Technical specifications
See the data sheet, document no. 4921230028.
To Next Page
Loading...
