Delem DA-65 - Page 217

Delem
V1101, 9.15
The next four parameters for minimum and maximum values of feedforward gain en differential
gain are optional. They might help to reduce the maximum error of the part support, but this
depends on the accuracy that is required. See sections 9.2.3 and 9.2.4 for more information about
gain parameters and adjustment procedures.
Parameter FN: Feedforward gain min
Range : 0 - 255
Unit : -
Default : 0
Function
Optional gain of the reference input signal, to reduce the maximum error.
Parameter FX: Feedforward gain max
Range : 0 - 255
Unit : -
Default : 0
Function
Optional gain of the reference input signal, to reduce the maximum error.