Delem
V1101, 2.4
Step 4: Select with the cursors keys the module you want to upgrade and press S1. Or press S2
to upgrade all the modules at once.
Step 5: The control displays the message ‘are you sure 1/0'. Press 1 to confirm.
Step 6: The upgrading process starts. When the upgrading process has been finished the
message appears ‘update successful’.
Illegal DM application
When for some reason illegal DM application software is present in one of the DM modules
(meaning you cannot work with the module) then you have to follow the next procedure:
Step 1: Put a floppy with the application file in the disk drive.
Step 2: Go to the machine parameters menu and go to the update screen.
Step 3: Reset the modules by removing and connecting the power supply of the modules.
Step 4: Select the module to be upgraded and press S1 ‘update module’.
Causes of possible illegal DM application software in the DM module are:
• Switching off the power supply while upgrading the software.
• Corrupted file with a correct checksum.
To Next Page
Loading...
