Need help?Do you have a question about the Delfield 18600 Series and is the answer not in the manual?
General| Category | Kitchen Appliances |
|---|---|
| Series | 18600 Series |
| Exterior Material | Stainless Steel |
| Type | Refrigerator |
| Configuration | Undercounter |
| Door Type | Solid Door |
| Number of Doors | 1 |
| Shelving | Adjustable |
| Energy Efficiency | Energy Star Qualified (select models) |
Covers general DANGER, Warning, and Caution statements regarding equipment operation and handling.
Details safety requirements for electrical connections, grounding, and utility compliance.
Focuses on safe handling and servicing of R290 refrigerant to prevent leaks or ignition.
Alerts users to chemicals in the product known to cause cancer or reproductive harm.
Lists all available model numbers for the 18600 Series and CTP-NB units.
Explains how to find the serial number and access warranty information online.
Lists the certifications and approvals (NSF, UL, cUL, CE) for the equipment.
Details requirements for the installation location, temperature, and ventilation.
Provides specific safety warnings and dangers related to the installation process.
Lists physical dimensions, weight, and minimum clearance requirements for various models.
Details the capacity of the units and specifications for rail systems.
Covers electrical requirements, plug types, voltage, and proper grounding procedures.
Instructions for drain hookups, caster/leg installation, leveling, and stabilizing.
Provides BTU capacity, heat of rejection, and refrigerant charge for different models.
Step-by-step instructions for installing the cutting board accessory.
General safety warnings and best practices for operating the equipment.
Covers operation for CTP-NB Series, Refrigerated Work Tables, and Rails.
Explains evaporator fan operation cycles and PTLV pressure control.
Describes 115V control assemblies, initial start-up, and defrost cycles.
Details the ERC112 control interface, status indications, and temperature alarms.
Step-by-step guide to changing the ERC112 display from Fahrenheit to Celsius.
Covers temperature controls, pressure controls, and high pressure limiting devices for export models.
Outlines safety responsibilities, PPE, and power disconnection for maintenance.
Instructions for cleaning the interior, gaskets, and preventing blower coil corrosion.
Guidance on cleaning exterior surfaces and maintaining drain lines.
Procedures for cleaning drawer assemblies and the condenser coil.
To Next Page
