Delfield T14D - Timed Blast Freezing

5.7 TIMED BLAST FREEZING
• Press push-button 4
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
(relative LED lights up), then press push-button 5
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
to select the timer mode
(LED 5B
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
on). Display 15
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
shows the maximum chilling time (set by default to 240 minutes).
To modify this time, press push-buttons 7
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
and 8
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
(time in minutes).
• Start up the cycle by pressing push-button 6
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
. LED 5B
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
and push-button LEDs remain on and
LEDs 13
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
ash throughout the cycle.
Internal cell temperature is shown on display 16
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
.
• When the maximum chilling time has counted back to 0, the cycle is completed and the appliance
automatically switches to the set negative storage temperature for an indenite interval.
LEDs illuminate and the beep is activated when the cycle is nished (as in the freezing cycle by temperature).
The same applies for the storage function. The factory setting for negative storage temperature is -13°F /
-25°C.
• Press push-button 6
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o
to set the appliance to STOP status (relative LED switches o), ready for a new
cycle.
IMPORTANT: During chilling or shock freezing by time it’s possible to read the evaporator temperature by
pressing push button
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
oC
HACCP
PROGRAM
0o
+38o
HARD
+38o