USER MANUAL AND INSTALLATION GUIDE
damaged! The safety equipment must be used as intended, it is strictly forbidden to modify or eliminate
them!
1. Do not operate the device in a damp, wet environment, the device can only be used indoors, in a dry place.
Otherwise, there is a risk of a short circuit!
2. The device may only be operated from an energy source that complies with the specication. (also in the
case of a USB port of a network adapter or other device)
3. Install the device so that it is not exposed to direct sunlight or heat sources!
4. It is forbidden to cover the device with any material! Do not disassemble the device. It is forbidden to modify
the parameters of the device!
5. The manufacturer and the distributor are not responsible for damages resulting from improper use and
installation!
APPLICATION:
1. Connect to your local WiFi network!
2. Application installation: Download Tuya Smart from the Play Store or AppStore and install it if you haven’t already.
To download the program, use your phone’s
camera to read the QR code below.
3. If you have a user account, log in to your prole. If you haven’t registered an account before, register by
entering your details and then log in.
4. If you have connected the garage door controller to a power source, the application will automatically
recognize it. Follow the on-screen instructions, add the device to your prole, name the device and, if
necessary, set the room in which the device is located.
EN
5
To Next Page
Loading...