USER MANUAL AND INSTALLATION GUIDE
(This can be useful in the case of several identical devices). If the program did not automatically recognize the
controller, please press the button on the side of the device for 5-6 seconds to factory reset. The device will
then go into pairing mode, try to nd the device again using the application.
For other information about the settings and operation of the application, refer to the description of
TuyaSmart.
INSTALLATION:
If you are unsure about the installation and electrical connection, always ask for the help of a professional.
Before installation, always de-energize the network and check with a phase pencil or multimeter. Keep the
garage door closed during installation. Only install the device if you have already added it to the application
and the communication between your phone and the device is successful!
1. Connect the controller to the appropriate port of the garage opener motor and ensure proper insulation.
EN
6
To Next Page
Loading...