Dell EMC PowerEdge C6420 - Internal View of the System

Item Indicator, button, or
connector
Icon Description
4 sled release lock N/A
Enables you to remove the sled
from the enclosure.
5 rear power button N/A
Enables you to power on the
sled while accessing it from the
rear.
6 iDRAC or NIC port
Enables you to remotely access
iDRAC. For more information,
see the iDRAC User’s Guide at
Dell.com/poweredgemanuals.
7 mini display port Enables you to connect a
display device to the system.
For more information, see the
Technical specications
section.
8 iDRAC Direct micro USB port
Enables you to connect a
portable device to the sled.
9 OCP or OPA card slot N/A
Enables you to connect Open
Compute Project (OCP) or
Omni-Path Architecture (OPA)
expansion cards. For more
information, see the Technical
specications section.
10 EST pull out tab N/A This tab has the unique
Express Service Code, Service
Tag, and MAC address labels.
11 system id indicator and button
The System Identication (ID)
button is available on the front
and back of the systems. Press
the button to identify a system
in a rack by turning on the
system ID button. You can also
use the system ID button to
reset iDRAC and to access
BIOS using the step through
mode.
12 USB 3.0 port (2)
The USB ports are 9-pin and
3.0-compliant. These ports
enable you to connect USB
devices to the system.
Internal view of the system
CAUTION: This system must be operated with the system cover installed to ensure proper cooling.
11