Configure BIOS and Install Adva OS
Configure BIOS settings required for Adva (UEFI and Legacy)
Topics:
• Configure BIOS to boot from USB
• ADVA OS Installation
• Configure BIOS to boot from SSD
Configure BIOS to boot from USB
1. Boot into the BIOS and go to the Advanced menu tab.
2. Select CSM Configuration and press Enter .
3. Change the Boot option filter to UEFI and Legacy mode.
4. Go to the Boot menu, select USB using the up and down arrows for Boot Option #1 and press Enter.
11
60 Configure BIOS and Install Adva OS
To Next Page
Loading...
