Your Dell Projector 7
About Your Projector
CAUTION: Safety Instructions
1
Do not use the projector near appliances that generate a lot of heat.
2
Do not use the projector in areas where there is an excessive amount of dust. The
dust may cause the system to fail and the projector will automatically shutdown.
3
Ensure that the projector is mounted in a well-ventilated area.
4
Do not block the ventilation slots and openings on the projector.
5
Ensure the projector operates between ambient temperatures (5ºC to 35ºC).
6
Do not try to touch the ventilation outlet as it can become very hot after the
projector has been turned on or immediately after it is turned off.
7
Do not look into the lens while the projector is on as it may cause injury to your
eyes.
1 Control panel
2 Zoom tab
3 Focus ring
4 Lens
5 IR receivers
6 Lens cap
7 Mounting holes for ceiling mount: Screw hole M3 x 4.6mm depth.
Recommended torque <8 kgf-cm
8 Mounting hole for tripod: Insert nut 1/4"*20 UNC
9 Lamp cover
10 Tilt adjustment wheel
1
2
3
4
6
5
110.00±0.15
55.00±0.10
82.30±0.15
14.00±0.10
7
8
9
10
Top View
Bottom View
To Next Page
Loading...
