Using Your Projector 39
LANGUAGE—Allows you to set the language for the OSD. Press on the control
panel or press
Enter
button on the remote control to activate the Language menu.
PROJECTOR MODE—Allows you to select the projector mode, depending upon how
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
• Rear Projection-Ceiling Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a ceiling-
mounted projection.
AUTO KEYSTONE—Select On to enable the auto correction for vertical image
distortion caused by tilting the projector.
V. K
EYSTONE—Manually adjust the vertical image distortion caused by tilting the
projector.
S
TANDBY VGA OUTPUT—Select On or Off the VGA output function at projector
standby status. Default is Off.
To Next Page
Loading...
