Using Your Projector 45
a
Go to
Others
menu, press on the control panel or press
Enter
button on the remote control and then select
Password
to
Enable
the password setting.
b
Enabling the Password function will pop up a character screen, key
in a 4-digit number from the screen and press on the control
panel or press
Enter
button on the remote control.
c
To confirm, enter the password again.
d
If the password verification is successful, you may resume with
accessing the projector's functions and its utilities.
2
If you have entered an incorrect password, you will be given
another 2 chances. After the three invalid attempts, the projector
will automatically turn off.
NOTE: If you forget your password, contact DELL™ or qualified service
personnel.
3
To disable the password function, select
Off
to disable the
function.
To Next Page
Loading...
