Dell 1907FPc Service Manual

Dell 1907FPc
17
NOTE: When the Dell Soundbar is not properly connected to the
monitor, the audio menu is not available.
Factory
Reset:
Reset the OSD menu options to the factory-preset values.
Exit — Select to exit out of Reset to Factory Settings menu without resetting
any OSD options.
Position settings only — Change the settings for Image Position back to
original factory settings.
Color settings only — Change the Red, Green, and Blue settings
back to their original factory settings and set the default setting
for Normal Preset.
All settings — Change all the user-adjustable settings including color, position,
brightness, contrast and OSD hold time to the factory defaults. The language of
the OSD does not change.
OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of
synchronization.
1. Analog Input
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
2. Digital Input
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either
the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.
www.ma163.com 电子技术资料网
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Dell 1907FPc Specifications

General

Brand	Dell
Model	1907FPc
Category	Monitor
Language	English