If you select Custom Installation, select the components
to be installed. You can also change the destination folder.
Click Next.
6. When the installation is complete, you may print a test page. Click Finish to complete the installation
and close the wizard. You are now ready to print.
Network Installation
Assigning an IP Address
Before using the printer on the network, you must set an IP
NOTE: If your printer is not connected to the computer, the following printer not founder windows will
appear.
address, subnet mask, and gateway for the printer. If you
want DHCP or BOOT
to automaticall
set the IP address, a
Page 40 of 5
To Next Page
Loading...
