Dell 2355dn Multifunction Mono Laser Printer - Printing in Netware

Appendix E. Netware environment 39
Printing in NetWare
To print to your network printer on a NetWare workstation, you need to add a
print queue.
NOTE: To use bindery emulation, you must log on to a Bindery server as an
administrator. In the NDS mode, log on to target text of the NDS tree where you
have administrator privileges.
Adding a queue
1 Open the NWADMIN dialogue box by double clicking on the NetWare
Client.
2 Right-click CONTEXT , then choose the create menu.
3 You will need to create all of the following items:
• Printer Server: represents a network print server.
• Printer: represents a network printing device.
• Printer Queue: represents a network print queue.
NOTE: The New Object dialogue box lets you choose the class of object to create.
4 Double-click each tree print object and select Assignments menu .
5 Click Add .
The print server object which was created in Step 3 has a link assigned to the
printer object and the printer object a link to the print queue object.
Adding a printer
1 Select Add Printer from the Printer and fax menu in the control panel.
2 Select Network Printer and click Next .
3 Select Novell Directory Service , and then click the context tree and an
existing printer object name.
4 Click Next .
5 If the server does not provide the printer driver or there is no one available
on the network, a dialogue box appears to allow users to select a printer
driver. Select the driver and click
Next .
6 Install the printer driver by following the onscreen instructions.