UsingYourProjector:Dell™3300MPProjector
Control Panel
Remote Control
On-Screen Display
See "Powering On/Off the Projector."
Increase or decrease the speaker volume.
Switch the display mode within PC Mode, Movie Mode, Game Mode, sRGB Mode, User Mode per your preference.
Press to step through Analog RGB, Composite, Component-i, S-video, and Analog YPbPr sources, and photo image from the card reader (Optional
accessory) when multiple sources are connected to the projector.
Press to synchronize the projector to the input source.
R-sync will not operate if the OSD (On-Screen Display) is displayed.
Press to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
The four directional keys can be used to toggle through the tabs in the OSD.
Press or button to adjust image distortion caused by tilting the projector. (± 9 degrees)
Remote Control
l If the remote control cover is closed:
The R-sync button functions as the right mouse button.
The Enter button functions as the left mouse button.
l If the remote control cover is open, use the directional pad to navigate through the OSD tabs.