Need help?Do you have a question about the Dell 4320 and is the answer not in the manual?
General| Native aspect ratio | 16:10 |
|---|---|
| Projection distance | 1.2 - 10 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 36.3 - 362 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | -35 - 40 ° |
| Audio input | 2 |
| Connectivity technology | Wired |
| Offset | 112.4 % |
| Focal length range | 18.2 - 21.8 mm |
| Lamp power | 300 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 2500 h |
| DVI port | No |
| AC (power) in | Yes |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 0 |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC 4.43, NTSC J, PAL 60, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, PAL Nc, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Supported graphics resolutions | 1280 x 800 (WXGA) |
| RMS rated power | 10 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Presentation |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 375 W |
| Optical disc player type | Not included |
| Noise level | - dB |
| Storage temperature (T-T) | 0 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Cables included | USB, VGA |
Weight and Dimensions| Depth | 247.8 mm |
|---|---|
| Width | 286 mm |
| Height | 110 mm |
| Weight | 2900 g |
Instructions for connecting via VGA, RS232, and USB cables.
Procedures for powering the projector on and off safely.
Steps to adjust projector height, zoom, and focus for optimal display.
Overview of navigating and using OSD menus for projector settings.
Addresses issues like no image, flickering, and incorrect display.
Step-by-step instructions for replacing the projector lamp.
To Next Page
