Dell S520 - User Manual

Other manuals for Dell S520

Firmware Upgrade Guide15 pages

Quick Guide12 pages

Setup Guide60 pages

Replacing Guide42 pages

Questions and Answers

A
Anthony BowersAug 11, 2025
What to do if the Dell S520 touch function is broken or not continuous?
- P
  paynebreannaAug 11, 2025
  If the line drawn is not continuous or you are encountering issues with the touch function, first check for any foreign objects on the whiteboard. If there is a halogen lamp near the projector and whiteboard, it may affect touch performance. Try turning off the halogen lamp, shielding the halogen lamp light to whiteboard or camera, or reducing Touch Sensitivity in driver. Be aware that reducing touch sensitivity may affect touch performance at whiteboard corners.
R
Robert LeeAug 17, 2025
Why is the touch function not working correctly on my Dell S520 Projector?
- R
  Ruth StevensAug 17, 2025
  There are several reasons why the touch function on your Dell Projector might not be working correctly: * There might be foreign objects on the whiteboard. Check the whiteboard and remove any obstructions. * A halogen lamp near the projector and whiteboard may affect touch performance. Try turning off the halogen lamp or shielding the light from the whiteboard or camera. * Reducing Touch Sensitivity in the driver may affect performance. Note that doing so may affect touch performance at whiteboard corners.
S
steven78Aug 26, 2025
What to do if there is a big gap between the cursor and touch point on my Dell S520?
- T
  thompsonsaraAug 27, 2025
  If you notice a large gap between the cursor and the touch point on your Dell Projector, execute the auto adjust touch referring to Part F.
K
Kevin ToddSep 2, 2025
How to fix touch functionality on the edge of the image of my Dell Projector?
- C
  cpriceSep 2, 2025
  To address touch functionality issues on the edge or corner of the image of your Dell Projector, execute the auto adjust touch or touch area by manual referring to Part F. Also, consider projecting at ~84" if the whiteboard bezel is affecting touch functionality on the edge of the image.