74 Using Your Projector
Enable Wireless or LAN on the Projector
1
Connect the power cable and turn on the projector by pressing the power
button.
2.1
If you choose the
LAN connection
mode, follow these steps to enable Wireless
and LAN function (default is
Enabled
):
Advanced Settings
LAN Settings
Wireless and LAN
Enabled
.
2.2
If you choose the
wireless connection
mode, follow these steps to enable
wireless connection (default is
Connected
):
Advanced Settings
Wireless
Settings
Wireless
Connected
.
NOTE: If your want to use the wireless connection for 4220 or 4320 projector,
need installed the optional wireless dongle. See "Installing the Optional
Wireless Dongle" on page 11.
To Next Page
Loading...
